Characteristics

Resistance to water and rain penetrating
Flexible emulsion coat, ability to fill unsightly cracks
Proving deep penetration and good adhesion on concrete surface
No Lead and Mercury added.

This is the flexible emulsion coating paint therefore it could be effected by dirt and easily to
scratch by hard collision

Construction Guide

Tools: Brush, Roller.


Dilution: Maximun 10% by Volume with clean water, the second coats do not need to dilute


Surface preparation: The substrate must be clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed. Ensure the wall is dry, the temperature of the surface should be ≤ 16% or 21 – 28 days new dry wall before painting.


Recoat: 3 hours


Coats: 2 coats (or 3 coats if necessary)


Precaution: The temperature of the substrate should be minimum 10°C . Stir well before use. Empty paint after opening the container. Follow to the recommended painting system.

Recommended paint system

Safety and environment

Keep out of reach of children. Remember to wear gloves, mask and glasses when working. If paint falls in your eyes, please wash by much water and come to nearest clinic. If you swallowpaint accidently, please come to see doctor immediately and bring along paint packaging. Working place must be dry. Please don’t recycle paint pails to keep food and drink. Please don’t release paint to environment, don’t pour paint into drain. When paint spilt, please collect it with sand. Carry with care.

 

DISCLAIMER


This information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product is often used under conditions beyond our control, we cannot guarantee anything only the quality of the product itself. We reserve the right to change the given data