Characteristics

ONIP D’ACCOR PUTTY is the premium exterior putty ideal for smoothing walls that helps to create the perfectly finish coat
Ideal for filling unsightly cracks and hiding any imperfections on the wall, cement, con-crete, brick, etc...

Construction Guide

Tools: Patch knife or Trowel

Ratio and mixture: Putty: Clean water =2.4 – 2.6 kg : 1kg
Put the required amount of water into the container. Pour the putty gradually and use the stirring machine to stir well until the mixture is smooth and unit. If the mixture is too thick due to long time before application, do not need to add water for diluting.

Surface preparation: The surface should be dry (moisture should be less than 16% by Protimeter or 21 to 28 days dry wall surface under normal conditions (average temperature is 30 degrees Celsius, humidity is 80% ), free from dust, oil, grease, laitance etc.

Application Data:

1. Apply the first layer with the thickness of 1-2 mm on the prepared surface.

2. Apply the second layer by the same thickness after the first coat is dry for 1.5-2 hours.

3. Sanding should be 1-2 days after second coat. After sanding, using a broom to clean the surface from dust, roll over the surface by wet towel or absorbent roller and then waiting about half a day for dry wall. 

Recommended paint system

Safety and environment

Keep out of reach of children. Remember to wear gloves, mask and glass when working. If paint falls in your eyes, please wash by much water and come to near-est clinic. If you swallow paint accidently, please come to see doctor immediately and bring along paint packaging. Working place must be dry. Please don’t recycle paint pails to keep food and drink. Please don’t release paint to environment, don’t pour paint into drain. When paint spilt, please collect it with sand. Carry with care.